Netgear D6220 modem/router

If you brought your Netgear D6220 modem/router to a telco, such as TPG, Dodo or Exetel, before bringing it to amaysim, you may need to change your modems settings so it can work with amaysim.

1. In your internet browser, type http://www.routerlogin.net into the browsers address bar and press enter
2. Login with these details:
   • Username: admin
   • Password: password
3. Select ADVANCED and then 'Setup Wizard'
4. Select country as ‘Australia’ and Internet Service Provider as ‘Other’
5. Select ‘Yes’ for Netgear GENIE to help
6. Your modem/router should connect to the internet
7. Restart modem/router, if necessary

If that does not work you will manually need to set up VDSL:

1. From the homepage of http://www.routerlogin.net select ‘Internet’
2. If available, select country as ‘Australia’ and Internet Service Provider as ‘Other’
3. Set Transfer Mode as ‘PTM’. DSL Mode should be ‘VDSL2’
4. In the dropdrown above ‘Enable This Interface’, select ‘Internet’
5. Ensure the box labelled 'Enable this interface' is ticked
6. Scroll down to ‘Does your internet connection require a login?’ and select ‘No’
7. Under ‘Internet IP Address’, select ‘Get dynamically from ISP’
8. Under ‘Domain name server (DNS) address', select 'Get automatically from ISP’
9. Under ‘NAT (Network Address Translation’, select ‘Enable’
10. Select ‘Apply’ 

User manuals

Netgear D6220